High-country-tek HGC-2, Closed Loop Controller Manuel d'utilisateur télécharger pdf (Page 4)

Hydraulic Generator Controller – HGC-2

 Digital controller for repeatability, reliability and accuracy in your application

 Accuracy is dependent on HGC-2 module ‘Tuning’ and the type of hydraulic circuit used

 100 to 250VRMS generator output compatible

 50 or 60 Hz settable for global sales opportunities ( trimmable frequency to +/-3Hz in 0.1Hz increments )

 User configurable Under and Over frequency handling.

 Wide supply voltage 9 to 28VDC and full reverse polarity protection.

 -20ºC ( -4ºF ) to +80ºC ( +176ºF ) controller operational temperature range.

 Valve dither frequency selectable in steps up to 1000Hz

 Fully adjustable PID closed loop control for smooth speed control with fast correction and accuracy

 Designed to meet CE criteria to latest standards.

 Diagnostic ‘Status’ LED shows I/O status and module operation at a glance.

 ‘Blinking’ error code LED for fast on-site system wiring / coil fault detection

 Solenoid PWM current output is short circuit protected.

 IP67 ( NEMA 6 ) rating on module for harsh environment reliability ( connector IP rating may differ ).

 Single Deutsch 8 way male connector for easy system wiring.

 Separate Infra-red communications connector for programming, monitoring and diagnostics.

 Rugged encapsulated enclosure withstands harsh environments found in mobile applications.

 Field programmable and upgradeable for future complex fan system applications.

 Intuitive Graphical User Interface ( GUI ), easy and fast to use for set-up and diagnostics

 Runs on any PC with Windows® XP Professional , Vista Business, Ultimate and Windows 7 software.

 Completely user configurable for retaining valuable IP and setting confidentiality.

 Compatible with ALL major hydraulic manufacturers suitable hydraulic products.

Product Features:

Manual Variations Note:

PC Screen shots shown in this manual may have small differences to the picture being displayed on the

Graphical User Interface you are using, This is normal and is due to the PC software being updated as we

add more functionality.

High Country Tek, Inc. reserve the right to improve this product at any time and without notice. This

manual may contain mistakes and printing errors. The information in this publication is regularly checked

and corrections made in the next issue. Please check our website or contact our customer support for latest

version. HCT accepts NO liability for technical mistakes or printing errors, or their consequences.

1 2 3 4 5 6 7 8 9 ... 23 24

Pas de commentaire

High-country-tek HGC-2, Closed Loop Controller Manuel d'utilisateur Page 4